Comtrend Corporation CT-5372E, User Manual

Page: 9 / 134

Chapter 2 Installation
2.1 Hardware Installation
In the rear panel, there is a reset button. To load the factory default settings, hold
the reset button down for at least
5 seconds.
Host
Reset button
Power Switch
Follow the instructions below to complete the hardware connections.
Connection to LINE port
If you wish to connect both the router and a telephone, connect the LINE port to a
POTS splitter with a RJ11 connection cable.
Connection to LAN port
To connect to a hub or PC, use a RJ45 cable. You can connect the router to up to four
LAN devices. The ports are auto-sensing MDI/X and either straight-through cable
or crossover cable can be used.
Connection to USB device port
Connect the USB device port to a PC with a standard USB cable.
Connection to USB host port
The CT-5372E is equipped with one high-speed USB2.0 host connection.
With software support, users can connect USB devices such as printers and a hard
disc to the CT-5372E. For this software release, printer server is supported.
8