Comtrend Corporation CT-5372E, User Manual

Page: 54 / 134

For further information on WAN, please reference section: 4.1, Page 19.
6.2 LAN
Configure the DSL Router IP Address and Subnet Mask for LAN interface. Save
button only saves the LAN configuration data. Save/Reboot button saves the LAN
configuration data and reboots the router to make the new configuration effective.
IP Address : Enter the IP address for the LAN port.
Subnet Mask : Enter the subnet mask for the LAN port.
Enable IGMP Snooping:
Enable IGMP Snooping function by ticking the box.
Standard Mode:
In standard mode, as in all prior releases, multicast traffic will
flood to all bridge ports when there is no client subscribes to any multicast group –
even when IGMP snooping is enabled.
Blocking Mode:
In blocking mode, the multicast data traffic will be blocked and not
flood to all bridge ports when there is no client subscription to any multicast group.
53