22
4.2.3
IP Over ATM
STEP 4:
Enter the WAN IP settings as provided by your ISP.
Since DHCP is not supported over IPoA, the default gateway settings and DNS
server addresses must be entered here. These should be provided by your ISP.
STEP 5:
Click
Next
to display the following screen.
Enable NAT
If the LAN is configured with a private IP address, the user should select this
checkbox
;
. The NAT submenu will appear in the Advanced Setup menu after
reboot. On the other hand, if a private IP address is not used on the LAN side (i.e.
the LAN side is using a public IP), this checkbox
;
should not be selected, so as to
free up system resources for improved performance.
Enable Firewall
If this checkbox
;
is selected, the Security submenu will be displayed on the
Advanced Setup menu after reboot. If firewall is not necessary, this checkbox
;
should be de-selected to free up system resources for better performance.
