76
6.3.1 QoS Queue Setup
6.3.1.1 QoS Queue Configuration
Configure queues with different priorities to be used for QoS setup.
In ATM mode, maximum 16 queues can be configured.
In PTM mode, maximum 8 queues can be configured.
For each Ethernet WAN interface, maximum 4 queues can be configured.
To remove queues, check their remove-checkboxes (for user created queues), then
click the
Remove
button.
The
Enable
button will scan through every queues in the table. Queues with
enable-checkbox checked will be enabled. Queues with enable-checkbox
un-checked will be disabled.
The enable-checkbox also shows status of the queue after page reload.
Note that if WMM function is disabled in Wireless Page, queues related to wireless
will not take effect. This function follows the Differentiated Services rule of IP QoS.
You can create a new Queue entry by clicking the
Add
button.
Enable and assign an interface and precedence on the next screen.
Click
Apply/Save
to apply and save the settings.
Summary of Contents for AR-5319
