Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 85 / 516

SLM-5650A Satellite Modem
Revision 10
Firmware Update 5–5 MN-SLM-5650A
5.2.3.1 Use Front Panel Operation to Find the Management IP Address
Ethernet IP Address/Range:
192.168.001.001/24 (

E)
You may view the assigned Management IP Address on the SELECT: Configure

Remote

EthernetConfig

IP Address/Range screen.
5.2.3.2 Use Front Panel Operation to Find the Firmware Information
You may view the base modem running M&C version at the top level screen. Press the CLEAR
key several times to view this information.
The detailed firmware information can be found within the SELECT: Utility

Firmware

Information

Image#1 or Image#2

Bulk nested submenus.
Examples of these screens are as follows:
Comtech SLM-5650A Modem State: GO
Firmware Version x.x.x Mode: TURBO
Bulk #1: FW-0000030XX,MM/DD/YY,1.4.X
5.2.3.3 Use the Serial Interface to Find the Firmware Information
Use your terminal emulator to execute remote queries with the modem. Use the “SWR” remote
query to find the firmware information:
<0/SWR?{CR}
(returns the firmware version numbers running under Boot, Bulk1, and Bulk2, in the form
Boot:xx.yy.zz Bulk1:xx.yy.zz Bulk2:xx.yy.zz)