Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 422 / 516

SLM-5650A Satellite Modem
Revision 10
Appendix E E–100 MN-SLM-5650A
E.8.2.11 Operations & Maintenance (O)
The Operations & Maintenance page, opened from the Main Menu , contains the following options
or fields:
Menu Options/Fields Entry Description
Statistics T
Provides you with read-only access to Ethernet Tx/Rx, LAN, WAN operating
statistics; allows you to clear existing statistics.
Ping/TraceRoute Target
IP
I
Allows you to edit target IP address for ping and trace route using the

arrow keys.
Ping Above Address P Allows you to ping on IP Address.
Max Trace Route Hops M
Allows you to set the maximum number of trace route hops using the

arrow keys.
Trace Route Above
Address
R Allows you to trace route on IP address.
Base Management Port B
Allows you to edit the Vipersat base management UDP/TCP port using the

arrow keys.
WAN to WAN Internal
Mcast Addr
W
Allows you to edit the WAN-WAN Internal Multicast Address using the

arrow keys.
Debug Menu D Password-restricted for factory use only.
Ping and Trace Route are only available through the CLI Operations &
Maintenance page. For ping and trace route to work, the you must enter a target
IP address. You can then choose to issue a Ping or Trace Route to the Target IP
Address. When doing a Trace Route, the maximum trace route hops can also be
specified.