Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 256 / 516

SLM-5650A Satellite Modem
Revision 10
Serial Remote Control 10–62 MN-SLM-5650A
Parameter
Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments
for Command
or Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
Modem IP
Interface
Security Mode
MIS= MIS? 1 byte Command or Query.
Sets or returns the modem IP Interface security level in the form a,
where:
0 = Normal or Low Level Security, and
1 = High Level Security
Example: <0001/MIS=0{CR}
MIS=
MIS?
MIS*
MIS#
MIS=a
Router IP
Address Mode
RIM= RIM? 1 byte Command or Query.
Sets or returns the NP Module’s IP Address Mode in the form a,
where:
0 = Single IP Address
1 = Dual IP Address
Example: <0001/RIM=0{CR}
RIM=
RIM?
RIM*
RIM#
RIM=a
Router Ethernet
Interface Traffic
IP Address and
Subnet Mask
RIP= RIP? 18 bytes Command or Query.
Sets or returns the IP Address and Subnet Mask for the NP Module
Traffic port in the form aaa.bbb.ccc.ddd.ee, where:
aaa.bbb.ccc.ddd = IP Address
ee = Subnet Mask (0-31)
Example: <0001/RIP=010.006.030.001.24{CR}
RIP=
RIP?
RIP*
RIP#
RIP=aaa.bbb.ccc.ddd.
ee