Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 254 / 516

SLM-5650A Satellite Modem
Revision 10
Serial Remote Control 10–60 MN-SLM-5650A
Parameter
Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments
for Command
or Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
Rx Ternary
Code
RTC= RTC? 1 byte Command or Query.
Sets or returns Rx Ternary Code in the form x, where:
0 = AMI
1 = B8ZS
2 = B6ZS
3 = HDB3
Example: <0001/RTC=3{CR} (Sets Rx Ternary Code to HDB3)
RTC=
RTC?
RTC*
RTC#
RTC=x
Receive T1
Framing
T1F= T1F? 1 byte Command or Query.
Sets or returns Receive T1 Framing in the form x, where:
0 = None
1 = G.704
Note: Command and Queries are not allowed when either the GBEI
or NP Module has been selected as the current interface type.
Example: <0001/T1F=0{CR}
T1F=
T1F?
T1F*
T1F#
T1F=x
Receive T2
Framing
T2F= T2F? 1 byte Command or Query.
Sets or returns Receive T2 Framing in the form x, where:
0 = None
1 = G.704
3 = G.743
5 = G.747
Note: Command and Queries are not allowed when either the GBEI
or NP Module has been selected as the current interface type.
Example: <0001/T2F=0{CR}
T2F=
T2F?
T2F*
T2F#
T2F=x
Tx Ternary
Code
TTC= TTC? 1 byte Command or Query.
Sets or returns Tx Ternary Code in the form x, where:
0 = AMI
1 = B8ZS
2 = B6ZS
3 = HDB3
Example: <0001/TTC=3 (Sets Tx Ternary Code to HDB3)
TTC=
TTC?
TTC*
TTC#
TTC=x