Comtech EF Data Vipersat SLM-5650A, Installation And Operation Manual

Page: 211 / 516

SLM-5650A Satellite Modem
Revision 10
Serial Remote Control 10–17 MN-SLM-5650A
Parameter
Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments
for Command
or Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
DSSS-MA Max
Power Limit
TPM= TPM? 5 bytes Command or Query.
Sets or returns the DSSS-MA Max Output power limit in the form
sxxx.x, where:
s = sign (+/–)
xx.x = Tx Output power level value where the range is from –40.0
to +10.0 dBm.
Example: <0001/TPM=–30.4{CR}
TPM=
TPM?
TPM*
TPM#
TPM=sxx.x
Tx Reed-
Solomon
Interleaver
Depth
TRD= TRD? 1 byte Command or Query.
Sets or returns the Tx RS encoding, where:
0 = Interleaver Depth 4
1 = Interleaver Depth 8
2 = Interleaver Depth 16
Note: Depending on the active modem mode, overhead type, and
data rate, not all selections will be valid.
Example: <0001/TRD=0{CR} (This is a ‘don’t care’ if RS is Off under
TRS)
TRD =
TRD?
TRD *
TRD #
TRD =x
Tx Reed-
Solomon
Encoding
TRS= TRS? 1 byte Command or Query.
Sets or returns the Tx RS encoding, where:
0 = Off
1 = On
Note: Depending on the active modem mode, not all selections will
be valid.
Example: <0001/TRS=0{CR} (sets RS encoding as Off)
TRS=
TRS?
TRS*
TRS#
TRS=x