DT-4500 Series C- and Ku-Band Down Converters
MN/DT4500.IOM
Firmware Update
Revision 2
5–4
5.2.3.1
Use the DT-4500 Front Panel to Get the Management IP
Address and Firmware information
Chapter 6. FRONT PANEL OPERATION
Using the unit front panel:
•
You may view find the factory-assigned Management IP Address within
the
CONFIG
REMOTE
ETHERNET
ADDRESS
menu branch:
IP Address/Range:
XXX.XXX.XXX.XXX/YY
•
You may view the current Firmware M&C version at the top-level menu
of the front panel display (press the
[CLEAR]
key several times):
DT_45XX –X
SW VER X.X.X SN#########
•
You may view the detailed firmware information within the
UTILITY
FIRMWARE
INFO
IMAGE#1
or
IMAGE#2
BULK
menu branches:
Image#X: BULK APP FPGA
Bulk#X: FW-0000202x
X.X.X. MM/DD/YY
5.2.3.2
Use the HTTP Interface to Find the Firmware Information
Chapter 7. ETHERNET INTERFACE OPERATION
Do these steps:
1.
Go to either of these pages to review the firmware information:
•
The ‘Firmware Information’ section of the ‘Config | Utility’ page
provides the firmware details as Boot, Bulk1, and Bulk2, as shown
in this example:
