Comtech EF Data CDM-625A, Installation And Operation Manual

Page: 393 / 756

CDM-625A Advanced Satellite Modem MN-CDM625A
Telnet Command Line Interface (CLI) Operation Revision 4
9–13
9.3.2.1 Home > Administration > Host Access List
Open the scrollable Host Access List page from the Administration submenu. This page contains
the following options:
Hot
Key Dialog Window
Function / Option Entry
A Access List Enforcement Use ↑↓ arrow keys to select Enabled or Disabled
B Access IP 1 Access IP List Entry Enable
Typical for each entry – Use ↑↓ arrow keys to set each list as
Enabled or Disabled
E Access IP 2 Access IP List Entry Enable
H Access IP 3 Access IP List Entry Enable
K Access IP 4 Access IP List Entry Enable
C Access IP 1 Access IP Address
Typical for each entry – Enter each IP Address in the form
XXX.XXX.XXX.XXX
F Access IP 2 Access IP Address
I Access IP 3 Access IP Address
Be sure to include your system’s IP Address in
this list
L Access IP 4 Access IP Address
D Access IP 1 Access Network Prefix
Typical for each entry – Enter a value as follows:
•
Range 1 – Enter a value of 0
•
Range 2 – Enter a value from 8 to 32
G Access IP 2 Access Network Prefix
J Access IP 3 Access Network Prefix
If you enter an invalid value, the CLI displays
error message “Number is out of range”
M Access IP 4 Access Network Prefix
Press a hot key to open a dialog window. Otherwise, press
[ESC]
to return to the Administration
submenu.