Computime TIMEVISION PLUS FACESCAN, Manual

Page: 6 / 29

T
IME
V
ISION
P
LUS
F
ACE
S
CAN
M
ANUAL
P
AGE
5 | 28
Contents & Requirements
Package Contents
 1 x FaceScan Terminal
 1 x Mounting Paper Template (PDF)
 1 x Instruction Manual (PDF)
 1 x Quick Start Guide (PDF)
 1 x 1 meter RJ-45 Network Cable
 1 x AC Adapter
 1 x Bag of Fixing Screws
Recommended Requirements

Pentium 4 processor

Microsoft Windows 2000, 512 MB of RAM

Microsoft Windows XP, 1 GB of RAM

Microsoft Windows Vista, 2 GB of RAM

Microsoft Windows 7 / 8 / 10, 2 GB of RAM

Colour monitor, 1024 x 768 or greater resolution

Network speed 10/100 Mbps
To view TimeVision Plus correctly you will need to make sure that the minimum screen resolution
is set to
1024 by 768 pixels . To set the resolution up you need to do the following:

Open the Windows Control Panel .

Click on ‘Display’ .

Click on ‘Screen Resolution’ .
You will also need to ensure that the text size is set to ‘Smaller (100%)’ . To ensure the text
size is set correctly, you need to do the following:

Open the Windows Control Panel .

Click on ‘Display’ .
Additional Requirements

A 3-pin 220-240v AC mains socket.

If you are planning to download via USB, you will need a USB stick (formatted to FAT32 )
and an available USB port on the computer.

For a network installation, you need a network point and a unique static IP address on
your network for the clocking terminal to use.

Please speak to your IT if you require assistance in obtaining a vacant IP address.