Computer Automation Technology CAT-800, Manual

Page: 70 / 105

9-2
CAT-800 Start Page
If the CAT-800 is connected to the internet, you can use the Internet browser in your computer, I-
Phone or I-Pad to control, program and execute user macros, force voice messages and send paging
tones. To execute one of the forty user macros enter the number into the cell and click [EXECUTE].
To send one of the twenty voice messages enter the voice message number and click [EXECUTE]. To
send one of the five paging tones enter the paging tone number and click [EXECUTE]. Click the
[EXECUTE] button to send the time of day. The CAT-800 will announce the time on the port #1
transmitter.
The CAT-800 also displays the software version, Internet connect time, microprocessor temperature,
and which ports are linked. Buttons are provided to reset the controller and logout.
NOTE: The CAT-800 operates in three loops. They are: The repeater control loop, the USB
communications loop and the Internet communications loop. Should the repeater control loop stop
but you are able to establish Internet communications with the controller, it “may” be possible to
restart the repeater control loop by pressing the reset button. This button performs the same function
as cycling power on the controller. It will not make any changed to the controller’s program and could
save you a trip to the repeater site.