Installation and Service Information
PCB Cameras
PM200
Read this information
before
installing, commissioning,
storing or operating the camera.
This Installation and Service Information booklet, edition 01 - 07/98, applies to the
PCB Cameras PM200/PMH200/PME200/PML200 (status 1998)
Environmentally safe disposal
The camera module contains environmentally harmful substances which have to be
disposed of in a special manner. If the module is no longer required, have it disposed of
by a special company or bring it to your local hazardous waste disposal point.
Specifications
Operating voltage
9 V DC ± 10%
Power consumption
120 mA
Image sensor
1/3" IT CCD
Effective pixels
PM200/PME200/PML200
512 × 582
PMH200
753 × 582
Resolution
PM200/PME200/PML200
380 (h) × 420 (v)
PMH200
550 (h) × 420 (v)
Video system
PAL
Scanning system
2:1 interlaced
Synchronisation
PM200/PMH200
internal
PME200
internal/external (C-SYNC)
PML200
internal/external (VDSYNC)
Scanning frequency
15625 kHz (h), 50 Hz (v)
S/N ratio
47 dB
Minimum illuminance
0.3 lux (F1.4, 3200 K, 10 IRE)
Gamma factor
0.45
Video signal output
VBS 1.0 V
p-p
, 75 ohms
Amplification gain control (AGC)
> 12 dB
Electronic shutter speeds
PM200
1/50 ... 1/15000 s
PME200/PML200
1/50 ... 1/10000 s
PMH200
1/50 ... 1/80000 s
Operating conditions
Temperature: –10 ... +50° C
Relative humidity: 70%, non-condensing
Storage conditions
Temperature: –20 ... +60° C
Relative humidity: 70%, non-condensing
Dimensions (W × H × D)
32 × 32 × 14 mm without lens and mount
