ACom6
47
(12/99)
Quality
The picture quality correlates with the size of the pictures. High quality images need more
memory space than images with a lower quality.
Camera Cycle
You can activate the camera switch in the control box
Active
. Define the dwell time in the
text box
Holdtime
and use the text box
Cameras
to define the sequence in which the dif-
ferent camera images are to be recorded.
Options
Use the field
Start,if one of these Alarms get active
to define (in the corresponding con-
trol boxes) which alarm is to trigger the recording. Use the list box
Stop recording after
to determine how long the recording is meant to last. Use the list box
Pre Alarm
to acti-
vate the ring recording mode. If you have entered a period in this list box, the ACom will
save incoming video data in a ring (loop) memory. Once all free memory space has been
occupied, the oldest data will be overwritten with new. In the case of an alarm, the video
images immediately preceding the trigger will also be available (along with the images
immediately after). This allows you to establish what has triggered an alarm.
☞
Important
When the function Pre-Alarm has been activated, no time-triggered recordings
can be carried out.
• Click the required control box or list box and enter the values as required in the text
panels.
• Click
Apply
or
Store
to save the settings as selected.
• Click
Close
to return to the tab
Recording
.
Configuration with CMCtrl
