Paper Handling
A78408744-002
48
Tear Off Line Adjustment
The Tear Off Line Adjustment procedure allows you to adjust the position of
the fanfold perforation in order to tear it against the printer tear off border
on the cover. This procedure is available only if the Program Setup is
previously entered.
The Tear Off Line Adjustment procedure can be executed at any time during the
printing.
Proceed as follows.
1.
Make sure that the printer is not enabled to print (
READY
indicator unlit
and the message
Wait
displayed).
2.
Enter the Program Setup by pressing the
PROGRAM
key.
3.
The following message will be displayed:
SELECT MACRO
4.
Press the
↓
key until the following message will be displayed:
PRINT ADJUSTMENT
5.
Press the
→
key to select the function. The following message will be
displayed:
Bidi.Alignment
6.
Now go on pressing the
↓
key until the following message will be
displayed:
Tear perfo Align
7.
The following temporary message will be displayed :
Parking paper
8.
Now if you press the
→
key the paper will be unloaded, reloaded and a
form feed executed. The paper will be taken to the corresponding tear off
line.
9.
Pressing the
↑
and
↓
keys you can scroll all the selectable values while
the paper will be moved.
10.
Pressing again the
→
key the displayed value will be selected
Summary of Contents for 4051 plus
Page 1: ...4051 plus 4056 plus User Manual...
Page 2: ......
