Compuprint 4051 plus, User Manual

Page: 40 / 75

Printer Setups
A78408744-002
32
Program Setup
The default values are marked with an asterisk (*).
These are the available functions:
SELECT MACRO
This function defines four different macros and allows to
configure the printer for different job types.
PRINT
ADJUSTMENT
This function allows the adjustment of the mechanical
parameters and the tuning of the first printing line.
PRINT STATUS
This function allows to print the current printer
configuration.
HEX DUMP
This function allows to enable the Hexadecimal Dump
mode.
Entering the Program Setup
To enter the Program Setup procedure, proceed as follows:
1. Make sure that the printer is not enabled to print (
READY
indicator unlit).
2. Press the
PROGRAM
key. The following message will be displayed:
SELECT MACRO
SELECT MACRO Function
MACRO SELECTION
HEX. DUMP. MACRO 4
↑ ↑
SELECT MACRO
→
or
←
MACRO 1
→
or
←
FONT
↑
or
↓
↓ ↓
DRAFT MODE
↑
or
↓
PRINT ADJUSTMENT MACRO 2 VERTICAL PITCH
↑
or
↓
LPI LOCK
↑
or
↓
PAGE LENGTH
↑
or
↓
TOP MARGIN
↑
or
↓
BOTTOM MARGIN
↑
or
↓
HORIZONTAL PITCH
↑
or
↓
CPI LOCK
↑
or
↓
LEFT MARGIN
↑
or
↓
RIGHT MARGIN
↑
or
↓
SLASHED ZERO
↑
or
↓
MULTICOPY
↑
or
↓
PRINT DIRECTION
↑
or
↓
This function allows to select one of the four available print environments.