fitlet2 FC-M2LAN installation instructions
Package
Content
2x
retaining
Washer
2x 6mm
Phillips
screw
1x FC-
M2LAN
1x side
panel
26-Dec-18
Page 1
Page 1: ...tlet2 FC M2LAN installation instructions Package Content 2x retaining Washer 2x 6mm Phillips screw 1x FC M2LAN 1x side panel 26 Dec 18 Page 1...
Page 2: ...ging or already assembled Place the retaining washers at the designated location on the cooling plate and seat the FC M2LAN on top of them Then fasten the 2x Phillips screws The cooling plate should b...
Page 3: ...plate onto the M 2 connectors Fasten the cooling plate in place assembling the 3x Phillips screws The 3x Philips screws supplied with the product s packaging or already assembled Stick the RTC battery...
Page 4: ...of the M 2 connectors Screw the 4x Phillips enclosure screw half way enough to hold the bottom cover in place but not too tight Complete by tightening the Phillips enclosure screws all the way down wh...
