COMPRO NC420, User Manual, Page: 52 / 80

Recording Setup 6-16
Compro NC420 / NC450
Recording Setup
In addition to the capability of storing event snapshots to local microSD Card slot (the camera's microSD Card
slot inside the housing is pre-installed with a 2GB microSD card), this camera also supports storage of video
clips (audio may be included if enabled) to either the local or the remote storage device. In order to fully
utilize this function, please refer to the following.
1. Destination: One of the following storage media may be selected.
Local Remote
microSD/SDHC V
NAS (Samba-based Network
Attached Storage)
V
NFS (Network File Server) V
Table 6-4. Choice of storage destination
2. microSD/SDHC Setup:
SD Card Status Status verification
SD Card Capacity Show available and total space in the card
Format Click to format SD card
Enable Recording during
network failure
Click to allow forced recording to SD card during network failure
Table 6-5. SD card setup
3. NAS Setup:
Domain Name / IP Address
Network of Samba-based NAS (Network Attached
Storage)
Directory Storage path
User Name / Password User authentication data set for NAS
Check NAS Status Status verification
Table 6-6. NAS setup
4. NFS Setup:
IP Address Network address of NFS (Network File Server)
Directory Storage path
Table 6-7. NFS setup
5. File Management: Once the selected storage is full, the oldest file will automatically be overridden.
6. Recording Setup: Click on [Next] to setup recording methods: Event-based or Scheduled.
Event-based Recording: Records when motion, audio and I/O are triggered (multiple choices).
Recording length: 60~3,600 sec, default 60 sec.
Schedule Recording: Allows non-stop recording for selected weekday(s) and start/end time.
Disable Recording: Turns off recording function.