To begin setup, insert the installation CD into your CD-ROM
drive, and the iWizard will start automatically. ( If it doesn’t,
browse the contents of the CD and run the ‘iWizard.exe’).
Then, select the language and the device you wish to set up.
The first step shows how to connect all the cables. Hit [Next]
twice to proceed with the 2nd step in which the iWizard scans
for available cameras on your local network. Then select your
camera from the list, and wait until the live video and camera
information are displayed on the right. (You can double-check
the device name and the MAC ID which are printed on the serial
number sticker on the back of the camera and on the package).
Click [Next] when you’re ready. Meanwhile, if you see the
Windows Security Alert dialog box during the search, please
choose [Unblock].
The default password is `admin.’ Enter a new password here
(please note down your new password). You can also click
[Next] to skip this process.
Check the camera name, date and time setting.
Please check the package contents. If anything is missing, please
don’t hesitate to contact your local distributor.
Network camera
RJ-45 LAN cable
Network Video Recorder
Screw for ceiling mount x 3,
screw anchor x 3, camera pad x4
Quick installation guide
2x
2x
Installation CD
Wall mount plate
Power adapter
Wireless antenna (only available
for CS530W)
IR LEDs x 6 (12 in total)
Light sensor
Lens
IR LEDs x 6 (12 in total)
D e t a c h a b l e w i r e l e s s
antenna
Microphone
LED status indicator
Ethernet port
Reset button
Audio output
Microphone in
Power connector
WPS button
LAN cable from PC to switch/router: If your LAN cable from
PC has been connected to the Cable/ADSL modem, please re-
connect it to the Ethernet port of your network switch/router.
Ethernet port on camera: Use the bundled RJ-45 LAN cable to
connect the Ethernet port of the IP camera to the Ethernet port
of your switch/router. Note you must use wired Ethernet to
configure wireless connection on CS530W
Wireless antenna (for CS530W only): If you are installing a
Compro CS530W, attach the supplied wireless antenna to the
connector provided on the back of the camera.
Power: Attach the power adapter to the camera’s power
connector and connect the power plug to a power outlet.
Follow the instruction below to mount the camera on the wall or ceiling.
Fix the mounting plate.
Attach the IP camera.
Loosen the screw that
fixes the trapezoid-shaped
fastening bracket
Let fastening bracket slide
into it s p osition on the
camera base (as circled).
Push and hold the fastening
bracket to the right.
Tighten the screw on the
fastening bracket.
IR LEDs x 6 (12 in total)
Light sensor
Lens
IR LEDs x 6 (12 in total)
Built-in microphone
LED status indicator
Ethernet port
Reset button
Audio output
Microphone in
Power connector
*
Do not rotate your CS530/CS530W camera manually as it may
damage your camera.
Network Camera
Quick Installation Guide
Set Up the Software
Connect the Cables
Mount the Camera
CS530 / CS530W
Package Contents
CS530 Hardware Overview
CS530W Hardware Overview