5 / 8
5.
Operation Controls and Functions
5.1
Transmitter Panel
Power LED: System power indicator.
Optical LED: Optical link indicator, illuminates when transmitter and
receiver establish optical link.
HDMI LED: HDMI input signal indicator, illuminates when HDMI input
has an active signal.
DC 5V: Connect 5V/1A adaptor for power supply.
Optical: Connect to receiver with a single or multi-mode fiber cable.
HDMI In: Connect to an HDMI source device.
IR In: Connect to an IR receiver cable and put IR receiver header close
to display device
’
s IR receiver window.
IR Out: Connect to an IR emitter cable and put IR emitter header close
to source device
’
s IR receiver window.
RS-232: RS-232 commands will pass through this extender.