12
Automatic Switching
The transmitter offers automatic switching function.
The automatic switching function follows the
Last-In-First-Out
rule. For
example, if a new active source is connected, the transmitter will automatically
switch to this source. If the source selected is removed, the transmitter will
automatically switch to the source with top priority (default priority: USB-C >
HDMI 1 > HDMI 2).
If you want the display to play video from a specific video source:
1. Disconnect the cable from your desired video source, and then connect it
again.
2. Use the Input Selection button on the front panel or API commands to
select your desired video source.
Note:
The automatic switching function can detect the input signal with 5V
only. If the selected source in standby mode provides a continuous 5V power
output, this function will not work, i.e. the transmitter will not switch the input
to other active sources. In this case, please turn off the selected source in
standby mode or remove it from the transmitter.
Summary of Contents for CHE-HDBTWP242K
Page 17: ......