Chapter 7
Advanced Configuration for Compex SGX3226
49
7.3.1
Application on Stack Management
From the figure shown below, SGX3226 Unit #1, #2 and #3 are stacked
accordingly. Individual switches are linked to its respective workgroup,
such as Workgroup A, B and C. Enabling the stacking function allows the
master switch to do the configuration on Unit #2 or Unit #3.
Figure 7.1
Application on Stacking function
In order to control all the slave switches, you need to enable the stacking
function for all switches. You may follow the procedures as shown below:
1.
Connect a RJ45 MDI straight Ethernet cable from the Control Station
to SGX3226 Unit #1. Enter http://192.168.100.128 in the internet
browser and select
Master
option in the
Stacking State
field. You
SGX3226 Unit #3 (Slave)
192.168.100.128
SGX3226 Unit #2 (Slave)
192.168.100.128
SGX3226 Unit #1(Master)
192.168.100.128
Workgroup B
Workgroup C
Control Station
Workgroup A
Summary of Contents for SGX3226
Page 1: ......
Page 14: ...Chapter 1 Product Overview 4 ...
