manualshive.com logo in svg

Compex SGX3226, User Manual

Share
Download
Compex SGX3226 User Manual Download Page 32

Chapter 5 

Web-based Interface Configuration for Compex SGX3226 

 

 

22 

5.3

 

Trunk Configuration 

Port Trunking is the ability to group together several switch ports to increase the 
bandwidth between Compex SGX3226 and other switch. This is an inexpensive 
method to increase throughput between switches (or to servers). 

 

 

NOTE 

To avoid broadcast storms, or looping in your network while configuring trunks, 
you need to disable/disconnect all the ports that you wish to add/remove from 
both sides of the trunk. Once you have finished configuring trunking, enable/re-
connect the ports. 

 

 

 
 

1.

 

You can choose up to 4 ports for trunking by selecting ‘-’ as ‘T’. 

 

2.

 

Click on the 

Apply

 button to update the changes and then the 

Save

 button to 

update the latest configuration. 

 
 

 

NOTE 

You may set up to 4 trunking ports for the switch. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for SGX3226



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands