Operating instructions
Switch controller for smart home
2016-V0113
1. Located the mounting bracket on the installation
place. Keep it horizontal. Mark the hole position
2. Open holes according to the marked position.
Put the screw anchors into the hole.
3. Put the mounting bracket and fasten it with screws.
4. Connect the smart home controller according to the
wiring diagram.
5. Pull down the buckle of the controller and aim to the
mounting bracket. Loose the buckle and the
controller is installed.
Installation instructions
Plastic
Screw
Mounting bracket
Security
Security
Innovation
Innovation
Technology
Technology
Vogue
Vogue
After Z86G smart home switch controller binds with indoor
monitor, indoor monitor and cell phones can control the
ON/OFF of light via network connection. For more information
about bind methods and operation, please read the user
manual of indoor monitor.
Notice