background image

The purpose of this guide is to assist you in correctly operating your TENS 7000™ unit.  Do not use 
this device for undiagnosed pain symptoms until consulting a physician. This guide is not intended 
to replace or substitute the TENS 7000™ Instruction Manual. PLEASE READ THE INSTRUCTION 
MANUAL COMPLETELY BEFORE USING THIS DEVICE. 

Read, understand and practice the 

contraindications, warnings, cautions and operating instructions found on pages 4 – 5 of your instruction 
manual. 

Always follow the operating instructions as listed in the manual.

QUICK REFERENCE GUIDE 

PAGE 1

1

2

Top

Side

Front

3

4

5

6

7

8

9

10

Lead connector sockets - 2 channels
On /   / intensity dial - 2 channels
Panel cover with reference guide
Liquid crystal display (LCD)
Mode selection button
Set selection button
Increment control / increase button
Increment control / decrease button
Protective cover
Belt clip

1
2
3
4
5
6
7
8
9

10

TENS 7000

 UNIT

For more information about your TENS 7000™ unit, please visit us online at www.compasshealthbrands.com or call 1-800-376-7263.

*The battery included is designed to be a starter battery. This battery is only 

intended to last 30 minutes to one hour before needing to be replaced.

The placement of electrodes can be one of the most 

important parameters in achieving success with TENS 

therapy. If the initial results are not positive, speak to 

your physician about alternative stimulation settings 

and/or electrode placement. Once desired results are 

achieved, mark down the electrode sites and settings 

for future reference. The TENS 7000™ features two 

protective covers that prevent unintentional changes 

to settings. 

Turn on device 

by rotating the dial clockwise and 

select the desired intensity level. 

device 

by turning dial counterclockwise  to O.

Low battery indicator            

signals when battery is 

low.  Replace battery when stimulation feels weaker.

SPECIAL FEATURES

INSERT BATTERY

Press arrow and slide 

battery compartment 

cover open.  Insert 

9V battery*, matching 

the + and – ends to 

those in unit. 

The battery should be 

placed on top of the 

compartment ribbon 

to allow easy battery 

removal.

LEAD WIRES

ELECTRODES

TENS 7000

Reviews: