Compaq StorageWorks b2000 - NAS, Maintenance And Service Manual

Page: 98 / 122

Connectors, LED Indicators, Switches, and Jumpers
4-16 NAS B2000 Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Collins Part Number: 292280-001 Last Saved On: 5/30/02 1:06 PM
System LEDs and Internal Health LED Status Combinations
When the internal health LED on the front panel illuminates either amber or red, the device is
experiencing a health event. Combinations of illuminated system LEDs and the internal
health LED indicate system status (Table 4-9).
IMPORTANT: For the internal health LED to provide pre-failure and system conditions,
the system management driver must be installed.
The front panel health LEDs indicate only the current hardware status. In some situations,
Compaq Insight Manager XE may report device status differently than the health LEDs
because the software tracks more system attributes.
Table 4-9: System LEDs and Internal Health LED Status Combinations
System LED and
Color Internal Health LED
Color Status
Processor failure,
socket
X (Amber)
Red Processor in socket X has failed.
Processor X has failed over to offline spare.
Processor X is not installed in the socket.
Processor X is unsupported.
ROM detects a failed processor during
POST.
Amber Processor in the socket is in a pre-failure
condition.
Processor failure, both
sockets (Amber) Red Processors are mismatched (speed and/or
type).
PPM failure, slot X
(Amber)
Red
PPM in slot X has failed.
PPM is not installed in slot X .
PPM is not installed in slot X , but the
corresponding processor is installed.
DIMM failure, slot X
(Amber)
Red DIMM in slot X has failed.
DIMM in slot X is an unsupported type, and
no valid memory exists in another bank.
DIMM in slot X has experienced a multi-bit
error.
Amber DIMM in slot X has reached single-bit
correctable error threshold.
DIMM in slot X is in a pre-failure condition.
DIMM in slot X is an unsupported type, but
valid memory exists in another bank.
continued