Removal and Replacement Procedures
NAS B2000 Maintenance and Service Guide
2-61
COMPAQ CONFIDENTIAL
Codename: Collins Part Number: 292280-001 Last Saved On: 5/30/02 11:58 AM
PCI Hot Plug Backplane Cable
To remove the PCI Hot Plug backplane cable:
1.
Power down the device. See the “Powering Down the Device” section in this chapter.
2.
Extend or remove the device from the rack. See the “Preparation Procedures” section in
this chapter.
3.
Remove the access panel. See the “Access Panel” section in this chapter.
4.
Remove the PCI riser cage. See the “PCI Riser Cage” section in this chapter.
5.
Disconnect the PCI Hot Plug backplane cable from the PCI Hot Plug backplane.
6.
Disconnect the PCI Hot Plug backplane cable from the PCI riser board.
1
2
Figure 2-59: Removing the PCI Hot Plug backplane
cable (PCI expansion board ejector/divider removed for
clarity)
Reverse steps 1 through 6 to replace the PCI Hot Plug backplane cable.
