Removal and Replacement Procedures
2-16
NAS B2000 Maintenance and Service Guide
COMPAQ CONFIDENTIAL
Codename: Collins Part Number: 292280-001 Last Saved On: 5/30/02 11:58 AM
Air Baffle
To remove the air baffle:
1.
Extend or remove the device from the rack. See the “Preparation Procedures” section in
this chapter.
2.
Remove the access panel. See the “Access Panel” section in this chapter.
3.
Lift the air baffle.
Figure 2-12: Removing the air baffle
CAUTION:
Always install the air baffle after completing hardware installation or
maintenance procedures. Operating the device without installing the air baffle
results in improper airflow and improper cooling that can lead to thermal
damage.
Reverse steps 1 through 3 to replace the air baffle.
