Setting Up and Installing the GbE Interconnect Switch
2-2
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL
Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:57 AM
•
Always install the interconnect modules in the top-left and top-right bays on the rear side
of the server blade enclosure.
•
Be sure that each interconnect module is fully seated. The latch/handle drops into place
when the module is firmly seated.
•
Always install the GbE Interconnect Switches into the communication bays, which are
the left-most (side A) and right-most (side B) bays on the front side of the server blade
enclosure.
Installing a New GbE Interconnect Switch for a New Deployment
1. Insert the interconnect modules into the top-left and top-right module bays on the rear
side of the ProLiant BL p-Class server blade enclosure.
Figure 2-1: Installing the QuadT or DualTSX
Interconnect Modules
