3-19
Compaq ProLiant 800 Servers Maintenance and Service Guide
Primary Processor Test Error Codes
The 100 series of Diagnostic error codes identifies failures with processor and system board
functions.
Table 3-2
Primary Processor Test Error Codes
Error Code
Description
Recommended Action
101-xx
CPU test failed
Replace the processor board and retest.
103-xx
104-xx
105-xx
106-xx
DMA page registers test failed.
Interrupt controller master test failed.
Port 61 error.
Keyboard controller self-test failed.
For error codes 103-xx through 106-xx, replace the
processor board and retest.
107-xx
108-xx
109-xx
CMOS RAM test failed.
CMOS interrupt test failed.
CMOS clock load data test failed.
The following steps apply to error codes 107-xx
through 109-xx:
1.
Replace the battery/clock module and
retest.
2.
Replace the system board and retest.
110-xx
111-xx
112-xx
113-xx
Programmable timer load data test failed.
Refresh detect test failed.
Speed test slow mode out of range.
Protected mode test failed.
For error codes 110-xx through 113-xx, replace the
system board and retest.
114-xx
Speaker test failed.
1.
Verify the speaker connection and retest.
2.
Replace the speaker and retest.
3.
Replace the system board and retest.
116-xx
Cache test failed.
Replace the system board and retest.
122-xx
123-xx
Multiprocessor Dispatch test failed.
Interprocessor Communication test failed.
The following steps apply to error codes 122-xx
through 123-xx:
1.
Check the system configuration and retest.
2.
Replace the processor board and retest.
3.
Replace the system board and retest.
199-xx
Installed devices test failed.
1.
Check the system configuration and retest.
2.
Verify cable connections and retest.
3.
Check switch and/or jumper settings and
retest.
4.
Run the Configuration utility and retest.
5.
Replace the processor board and retest.
6.
Replace the system board and retest.
