manualshive.com logo in svg

Compaq Presario 2410 ES, Maintenance & Service Manual, Page: 44 / 74

Share
Download
Compaq Presario 2410 ES Maintenance & Service Manual Download Page 44

Compaq.com - Compaq Presario Maintenance and Service Guide - 2250, 2410 ES, 2510, and 4240 ES Series

United States     December 10, 2002 

 

Maintenance & Service Guide

Presario 2250 Series

2510, 2410 ES & 4240 ES Personal Computers

Home

  |   

Preface

    |   

Product Description

   |   

Troubleshooting

   |   

Illustrated Parts

   |    

Removal & Replacement

Jumpers & Switches

   |   

Specifications

   |   

Connector Pins

    |   

Power Cord Requirements

Removal and Replacement

Removing the Left Speaker

Removing the Left Speaker

1.

Perform the 
preparation 
procedures.

2.

Remove the hood.

3.

Move the air baffle 
out of the way.

4.

Remove the drive 
cage from the 
chassis.

5.

Remove the front 
bezel.

6.

Disconnect the 
speaker cables from 
the system board.

7.

Remove the four 
screws from the rear 
of the right speaker 
and separate the 
speaker from the 
chassis.

8.

Remove the three 

screws from the left 

speaker and separate 

the speaker from the 

chassis.

End of sequence. To 

replace the speakers, 

reverse this procedure.

 

  

 

 

privacy statement
legal notices

http://h18000.www1.hp.com/athome/support/msgs/2000/spkr_l.html [12/10/2002 9:01:25 AM]

Summary of Contents for Presario 2410 ES











































































Reviews:

No comments