Server Configuration and Utilities
5-5
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 236843-002 File Name: f-ch5 Server Configuration and Utilities.doc Last Saved On: 9/4/01 10:13 AM
Server Passwords
The
Server Passwords
menu configures the password environment of the
server. The available options are:
■
Set Admin Password
sets a password to control access to the
administrative features of the server. When this password is set, the
administrative features of the server cannot be accessed without the
correct password being entered.
■
Set Power-On Password
sets a password to control access to the server
during power up. When this password is set, the server cannot be
powered up without the correct password being entered.
■
Network Server Mode
is a security feature that protects an unattended
network server while allowing it to run after a power interruption. When
set to
Disabled
, the server operates normally. When set to
Enabled
, the
following actions occur:
!
The local keyboard does not function unless the power-on password
is entered.
!
When there is not a diskette in the diskette drive, the power-on
password is bypassed, allowing the server to start.
!
When there is a diskette in the diskette drive, the server does not
start unless the power-on password is entered locally.
IMPORTANT:
Network Server Mode cannot be enabled until a power-on password has
been established through the
Set Power-On Password
menu.
■
Quicklock
enables or disables the Quicklock feature. When set to
Enabled
, the keyboard is locked by pressing the
Ctrl
+
Alt
+
L
keys. The
keyboard remains locked until the password is typed in.
IMPORTANT:
If the password is disabled at the power-on key prompt, the Quicklock
password feature will remain active until the next time the system is powered up.
