Hardware Options Installation
3-33
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 236843-002 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 9/5/01 12:33 PM
9. Lift the heatsink retaining clip over the rear edge of the socket and hook
underneath the socket tabs.
Figure 3-31. Seating the processor clip on the rear of the socket
10. Clasp the front of the assembly clip over the front edge of the socket .
11. Press the assembly clip down to secure the heatsink and processor
assembly in the socket .
CAUTION:
Applying too much pressure on the assembly clip lever could cause
it to break. Use care when performing this step.
1
2
Figure 3-32. Securing the processor and heatsink assembly on the front of
the socket
