LED Indicators, Switches, and Jumpers
E-9
Compaq Confidential – Need to Know Required
Writer:
Jennifer Hayward
Project:
Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide
Comments:
Part Number:
236843-002
File Name:
k-appe LEDs & Switches.doc
Last Saved On:
9/4/01 11:16 AM
Resetting System Configuration Settings
It may be necessary at some time to clear and reset system configuration
settings. When the system configuration switch position 6 is set to the
on
position, the system is prepared to erase all system configuration settings from
both CMOS and NVRAM:
IMPORTANT:
Clearing nonvolatile RAM (NVRAM) deletes your configuration information.
Refer to Chapter 5 for complete instructions on configuring your server.
1. Power down the server.
2. Set the system configuration switch position 6 to the
on
position.
3. Power up the server.
All configuration settings are now erased and all system operations halt.
4. Power down the server.
5. Reset the position 6 switch to the default
off
position.
6. Power up the server.
7. Reset all system configuration settings.
See Chapter 5, “Server Configuration and Utilities,” or the
Compaq
ROM Based Setup Utility User Guide
found on your server
documentation CD, for more information on RBSU.
