Compaq iPAQ IA-1, Quick Start Manual

Page: 111 / 119

A
PPENDIX
-8 H
OME
I
NTERNET
A
PPLIANCE
—G
ETTING
S
TARTED
European Union Notice
European Union Notice
Telecommunications Terminal Equipment with the CE marking
comply with Telecommunication Terminal Equipment and
Satellite Earth Station Equipment (TTE & SES) Directive (98/
13/EC), the EMC Directive (89/336/EEC) and the Low Voltage
Directive (73/23/EEC) issued by the European Community.
Compliance with these directives implies conformity to the
following European Norms or Regulations (in brackets are the
equivalent international standards and regulations):
• EN55022 (CISPR 22) - Electromagnetic Interference
• EN50082-1 (IEC801-2, IEC801-3, IEC801-4) -
Electromagnetic Immunity
• EN60950 (IEC950) - Product Safety
• CTR21 (ETSI TBR21) - Attachment requirements for
connection to the analogue PSTNs of terminal equipment
The equipment has been approved in accordance with Council
Decision 98/482/EC for pan-European single terminal
connection to the Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself,
give an unconditional assurance of successful operation on every
PSTN network termination point. In the event of problems, you
should contact your equipment supplier in the first instance.
The equipment is designed to work with all EU telephone
networks. However, the equipment may have interworking
difficulties for some connections on the EU public networks.
Dialing by loop disconnect pulses is not intended to be used on
the PSTN. This feature is only supported in consideration of
PBX or other equipment which requires pulse dialling.
Network compatibility is dependent on software switch settings
which are set automatically by the country selection. The user
should contact the equipment supplier in case of difficulty in
network settings.
European Union
Notice