Compaq FastTrak100 TX2 ATA-100 Specification Download Page 1

QuickSpecs 

FastTrak100 TX2 ATA/100

Dual Channel RAID Controller

 

 

 

DA-11326 

World Wide — Version 2  — February 27, 2002

 

1

 

M

O D E L S

 

Compaq Promise

 FastTrak100™ TX2 ATA/100 Dual Channel RAID Controller 

238051-B21 

O

V E R V I E W

 

The Compaq Promise FastTrak100TX2 ATA/100 Dual Channel RAID Controller offers a low-cost, high-performance, high-capacity storage solution that 

provides maximum protection against data loss and maximum uptime if a hard drive fails. The FastTrak TX2 Dual Channel RAID controller targets 

professional workstation and desktop users running audio/visual, desktop video, and CAD applications. Virtually every major worldwide drive 

manufacturer has tested the dependable ATA/100 chipset with high-speed CRC (Cyclical Redundancy Checking). The integrated LBA BIOS automatically 

identifies and optimizes the speed of attached drives for maximum throughput and drive compatibility.  

Performance 

The FastTrak100 TX2 ATA/100 Dual Channel RAID Controller offers two independent data channels to support a maximum of four ATA/100 drives. With 

a 66-MHz bus motherboard, the controller achieves outstanding RAID 0 striping with sustained speeds that can reach up to 200 MB/s. The FastTrak100 

TX2 ATA/100 Dual Channel RAID Controller protects critical data with faster data transfers under fault-tolerant, two-drive RAID 1 mirroring. The BIOS-

level FastBuild™ technology in the controller offers both automatic and manual array setup menus. 

NOTE

: For maximum performance, one drive per channel is recommended. 

Key Benefits 

• 

Offers up to 266-MB/s maximum data transfers (133 MB/s in a 33-MHz slot)  

• 

Supports 66-MHz PCI motherboards for higher data bandwidth (backwards-compatible with 33-MHz PCI bus motherboards) 

• 

Supports hot-swapping of failed drive under RAID 1 

• 

Accepts standard high performance ATA/100 drives  

• 

Boosts overall system performance with burst data transfer rates of up to 100 MB/s from Ultra ATA/100 drives 

• 

Offers Plug-n-Play compatibility for easy installation 

• 

Supports concurrent IDE channel operation to distribute drive workload 

• 

Allows multitasking during disk transfers to increase CPU efficiency 

• 

Utilizes FastBuild technology to create pre-set, application-specific settings for desktops, servers, or audio/visual editing 

• 

Notifies user of possible errors and allows for recovery of mirrored drive arrays directly from FastBuild 

• 

Supports Ultra ATA/100 specifications with 100-MB/s timing and CRC at high speeds 

• 

Provides 32-bit I/O, IDE bus master, and Ultra ATA performance 

NOTE

: Requires use of SuperSwap™ hot swap chassis available from Promise Technology, Inc. 

 

C

O M P A T I B I L I T Y

 

The FastTrak100 TX2 ATA/100 Dual Channel RAID Controller is compatible with Compaq Professional Workstation AP230, Compaq 

Evo™

 Workstation 

W4000, and Compaq 

Evo

 D300 and D500 Desktops, except not supported for 

Evo 

D300v Microtower or 

Evo 

D500 Ultra-slim Desktop computers.

 

S

E R V I C E   A N D  

S

U P P O R T

 

The FastTrak100 TX2 ATA/100 Dual Channel RAID Controller has a One-year Limited Warranty or the remainder of the warranty of the Compaq product 

in which it is installed. Technical support is available seven days a week, 24 hours a day by phone, as well as online support forums. Certain restrictions 

and exclusions apply. 
 

 

Reviews: