Compaq DL360 - ProLiant - Photon User Manual Download

Page: 39 / 141

Configuring an Array

Compaq Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler User Guide

7-5

COMPAQ CONFIDENTIAL

Writer: Amy L. Laffitte File Name: h-ch7 Configuring an Array

Codename: Executor Part Number: 266328-001 Last Saved On: 2/8/02 10:39 AM

See the “About This Guide” section for technical support phone numbers.

You can view context-sensitive online help for each screen by pressing the

key or

clicking

Help

. The status bar at the bottom of the screen also displays messages

describing the current selection.

NOTE:

Raw logical drives are invisible to the operating system. To make the new logical

drives available for data storage, format the logical drive using the instructions given in your
operating system documentation.

Running ACU from CD

This method of running ACU is valid for Windows NT, Windows 2000, Linux, and
Novell NetWare operating systems.

Insert the CD into the CD-ROM drive and restart the server.

When the CD menu is displayed, double-click the

ACU

icon.

Configure your array (see the “Typical Manual Configuration Procedures”
section for details if you do not want to use the wizard).

Remove the CD and restart the server to activate the new settings.

Running ACU while Online

You can run ACU online with the Windows NT or Windows 2000 operating system.

Insert the CD into the CD-ROM drive of the server and follow the on-screen
instructions to download the utility.

When installation is complete, click

Start,

and then select

Compaq System

Tools.

Double-click

ACU

Summary of Contents for DL360 - ProLiant - Photon














































































































































Search results

Summary of Contents for DL360 - ProLiant - Photon

Reviews:

Related manuals for DL360 - ProLiant - Photon

Brands by name

Popular brands

Compaq DL360 - ProLiant - Photon, User Manual

Search results

Summary of Contents for DL360 - ProLiant - Photon

Reviews:

Related manuals for DL360 - ProLiant - Photon

Brands by name

Popular brands