manualshive.com logo in svg

Compaq DL360 - ProLiant - Photon, User Manual

Share
Download
Compaq DL360 - ProLiant - Photon User Manual Download Page 12

Compaq Smart Array 5i Plus Controller User Guide

1-1

COMPAQ CONFIDENTIAL

Writer: Amy L. Laffitte File Name: b-ch.1-features

Codename: Executor Part Number: 266328-001 Last Saved On: 4/18/02 2:33 PM

1

Features

The Smart Array 5i Plus Controller and Battery Backed Write Cache Enabler is a
Wide Ultra3 SCSI hard drive array controller with a 64-MB read/write embedded
cache and a Battery Backed Write Cache Enabler, which provides transportable data
protection and increases overall controller performance.

Overview of Controller Features

•

 

Has dual Wide Ultra3 SCSI channels supporting up to 14 drives

•

 

Supports the following operating systems:

—

 

Microsoft Windows 2000

—

 

Microsoft Windows NT 4.0

—

 

Novell Netware 5.X and 6.X

—

 

Linux (Refer to the Compaq website for further information about Linux

version support.)

—

 

SCO UnixWare 7.XX

•

 

Supports the Compaq Universal Hot-Plug Tape Drive

•

 

Supports drive and array movement to the Smart Array 532, Smart Array
5302/5304 and Smart Array 5i controllers

•

 

Provides backward compatibility with Wide Ultra2 SCSI devices

•

 

Uses a 32- or 64-bit PCI bus master interface

•

 

Has a user selectable read or optional write cache allocation from 0-64 MB

Summary of Contents for DL360 - ProLiant - Photon














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands