manualshive.com logo in svg

Compaq BL10e - HP ProLiant - 512 MB RAM, Setup And Installation Manual, Page: 56 / 156

Share
Download
Compaq BL10e - HP ProLiant - 512 MB RAM Setup And Installation Manual Download Page 56

Installing and Cabling the System 

 

Table 3-3:  RJ-45 Patch Panel Connectors 

Item Description 

Location 

1 

RJ-45 connector for server blade bay 20 NIC 1  

RJ-45 patch panel 

2 

RJ-45 connector for server blade bay 20 NIC 2  

RJ-45 patch panel 

3 

Integrated Administrator management connector 
(10/100 Ethernet)*

 

Integrated Administrator module 

4 

Integrated Administrator console connector (serial)* 

Integrated Administrator module 

5 

Enclosure link (RJ-45) connector—Reserved* 

Integrated Administrator module 

6 

Enclosure link (RJ-45) connector—Reserved* 

Integrated Administrator module 

7 

RJ-45 connector for server blade bay 1 NIC 1  

RJ-45 patch panel 

8 

RJ-45 connector for server blade bay 1 NIC 2  

RJ-45 patch panel 

  * These items denote connectors for the Integrated Administrator module.  

Cabling the Enclosure 

To cable a ProLiant BL e-Class server blade enclosure already installed in a rack: 

 

 

CAUTION:

  Do not connect external devices to the enclosure link (RJ-45) 

connectors unless the device is listed as a supported device on the server 
Quickspecs. Connecting an unsupported external device to the enclosure link 
(RJ-45) connectors may damage the external device. Refer to the “Identifying 
Interconnect Tray Connectors” section of this chapter to locate the enclosure link 
(RJ-45) connectors. 

1. 

For accessing and configuring the Integrated Administrator locally, connect a 
client device (running VT-100 terminal emulation software) to the Integrated 
Administrator console connector using a null-modem cable (provided with the 
enclosure). For accessing and configuring the Integrated Administrator over the 
network, connect the Integrated Administrator to the management network using 
the management connector. 

3-18

 

HP ProLiant BL e-Class System Setup and Installation Guide 

  

HP CONFIDENTIAL

 

Writer: Karen Hale File Name: d-ch3 Installing and Cabling the System.doc 

Codename: MacDuff Part Number: 249068-003 Last Saved On: 5/21/03 3:04 PM 

Summary of Contents for BL10e - HP ProLiant - 512 MB RAM





























































































































































Reviews:

No comments