2-26
Compaq StorageWorks SSL2000 Series Library Reference Guide
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks SSL2000 Series Library Reference Guide
Comments:
Part Number:
187193-001
File Name:
c-ch2 Installation.doc
Last Saved On:
4/17/00 9:10 AM
Baud Rate:
Lets you set the data transmission rate of the trace port. This
function is intended for use by CEs only. The default is 38400 bits/s.
Reserved Slots:
Lets you withdraw from use a specified number of slots in
the back of the magazine. Some host software imposes size limits on tape
library magazines for licensing purposes, and does not operate with a library
that exceeds the licensed size. The default is 0.
Model Number:
Lets you change the model number information displayed on
the initial screens. You can choose between Compaq SSL2020, a blank line,
and a vendor unique number. The Default is Compaq SSL2020.
Bar Code Options
Label Size:
Lets you limit length of the bar code label. Possible settings are 1
through 8. The default is 8.
Label Alignment:
Lets you specify the alignment of a bar code label. The
options are Left or Right. When used in conjunction with the label size option,
strips unwanted trailing characters (left alignment) or leading characters (right
alignment). The default is Left Alignment.
Check Digit:
Lets you set the data transmission rate of the trace port. This
function is intended for use by CEs only. The default is Enable/No Send.
