Updating the System Firmware
Compaq Smart Array 5300 Controller User Guide
4-3
COMPAQ CONFIDENTIAL
Writer: John Turner File Name: e-ch4 updating the system firmware.doc
Codename: SilverHammer Part Number: 135606-004 Last Saved On: 7/22/02 11:19 AM
Using the Diskette
1.
With the server powered down, place the System ROMPaq diskette in the
diskette drive.
2.
Power up the server.
3.
When the
Welcome
screen is displayed, press the
Enter
key.
4.
When the
Select A Device
screen is displayed, select your server from the list of
programmable devices, and then press the
Enter
key.
The
Select An Image
screen is displayed, showing the following information:
Device to reprogram:
your server
Current ROM revision:
date of existing ROM version
Select Firmware Images:
date of latest ROM version
5.
Press the
Enter
key. The
Caution
screen is displayed.
6.
Press the
Enter
key. The following message is displayed:
Reprogramming Firmware
Do not interrupt the reprogramming process. You will be notified when
reprogramming is complete.
7.
When reprogramming has finished, press the
Esc
key to exit the utility.
8.
Remove the System ROMPaq diskette and restart the server.