background image

INSTALLATION & SAFETY INSTRUCTIONS

MODEL: JKFSWT

These instructions are for guidance only

Retain these instructions for future reference.

PLEASE CONSULT A QUALIFIED ELECTRICIAN

General safety instructions 

• Ensure mains power is disconnected & switched off when instal

ns and cannot be unintentionally reconnected.

• Place only upon level and stable surfaces.

• Do not use in areas in which there is a danger of explosion.

• Do not place in water or other liquids.

• Never operate with wet hands.

• Never cover the equipment.

• Never operate when the casing is open, or when the wiring casing is missing or damaged, or when the casing is defective.

• Never attempt to repair this unit yourself. Repairs should on

• If the supply cord is damaged, stop using the unit immediatel

• If diffuser is broken, stop using the unit immediately & cons

Programming the timer to continue through midnight

 

1. 

Program the ON time as described above. 

2. 

Program the OFF time as 00:00.

3. 

Modifying or Adding Programs

1. 

Press 

PROG

 and hold for 3 seconds. 

2. 

The mode in which it was last programmed will be displayed. (7 Day or 5 Day for instance).

3. 

The mode can be adjust using the 

BOOST/ADV

 buttons from 5 Day to 7 Day or another mode.

4. 

Press 

PROG

 to accept the new mode and advance to adjusting the timer ON/OFF settings. 

5. 

Review the times and adjust as described in ‘Timer Programming’ section.

 

BOOST Button

1. 

Press the 

BOOST

 button once to switch the load on for 1 hour. 

BOOST

 

1

 displays on the screen.

2. 

Press the 

BOOST

 button twice to switch the load on for 2 hours. 

BOOST

 

2

 displays on the screen.   

3. 

Press the 

BOOST

 button three times to turn the load off again. 

 

ADVANCE Button

1. 

Press the 

ADV

 button once to switch the load on continuously until the next Timer OFF setting is reached. 

2. 

Press the 

ADV

 button twice to override the timer. The load will stay on permanently until the 

ADV

 button is pressed 

again, returning the device to timer mode. 

 

Operating voltage

220-240V AC 

Operating frequency

50Hz

Load/switch rating

13A (3kW) Max (Resistive), 700W Incandescent/halogen 

lighting, 500W Fluorescent lighting, 80W CFL Lighting, 150W 

LED 

Operating Temperature

0 to 40’C

Battery back-up

Up to 4 weeks

Timer type

7 day, 24 hour digital

Contacts

Normally Open, not volt-free

Terminals max cable size

2 x 2.5mm or 1 x 4mm

Dimensions

85mm (w) x 85mm (h) x 38mm (d)

Correct Disposal of this product

 

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the 

environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return 

your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product 

for environmental safe recycling.

Guarantee 

 

This product is manufactured from high quality components and is quality assured to meet the standards set by the 

European Commision and BSI. 

This product is covered by a 1 year manufacturer’s guarantee.

In the unlikely event that you experience a fault with the product, please return it to your supplier with proof of pur

-

chase for a replacement. 

Reviews: