Compal NTUC0, User Manual

Page: 171 / 179

NTUC0 User Manual
9.2.1 Accessing the BIOS Setup Program
To access the BIOS Setup program, press the [F2] key as soon as your notebook
starts up. The Phoenix BIOS screen will display.
The Menu Bar
The top of the Setup screen has a menu bar with the following selections:
Main
Allows the user to specify standard IBM PC AT system
parameters.
Security
Provides security settings of the system.
Boot
Allows the user to specify the order in which your notebook is to
check for a device to boot the system.
Exit
Allows the user to save CMOS setting and exit Setup.
Phoenix SecureCore(tm) Setup Utility
Main Security Boot Exit
Item specific Help
System Time: [XX:XX:XX]
System Date: [XX/XX/XXXX]
Product Name:
N/A
Serial Number:
N/A
System Memory: XXX KB
Extended Memory: XXXX MB
BIOS Version: X
.
XX
UUID Number: XXXXXXXX
XXXXXXXX
<Tab>, <Shift-Tab>, or
<Enter> selects fields.
F1 Help
↑↓
Select Item
-
/
+
Change Values F9 Setup Defaults
Esc Exit
←→
Select Menu Enter Select
4
Sub-Menu F10 Save and Exit
9-4