INS_FVT/FVR20D2I1C4E_REV- 06/22/12 PAGE 1
INSTALLATION AND OPERATION MANUAL
FVT/FVR10D2I1C4E
10-BIT DIGITALLY ENCODED VIDEO
+ 2 BI-DIRECTIONAL DATA + AIPHONE
™
INTERCOM
+ 4 CONTACT CLOSURE
+ 100MB ETHERNET
+ REDUNDANT POINT-TO-POINT DUAL SFP OPTICAL PORTS
The FVT/FVR10D2I1C4E series utilize 10-bit digital video encoding and decoding
for high-quality video transmission that meets the requirements of EIA RS-250C
for short-haul video transmission. These environmentally hardened units provide
transmission of one video channel and two bi-directional data channels. They also
provide transmission of one Aiphone
™
intercom channel and four contact closure
channels with tamper supervision in addition to one 10/100Mb Ethernet channel.
The ComNet
™
FVT/FVR10D2I1C4E has dual optical (SFP) ports to provide a redundant
point-to-point fail safe topology in the event of loss of one fiber or one optical module.
Operational status can be monitored by using the web management interface
through the addition of the ComNet network managed chassis and network
management interface module.
Bi-color (red/green) LED indicators are provided for confirming operating status in
addition to alarm contacts for fault monitoring. See
Figure 15
on
Page 9
for LED
explanations.
Packaged in the exclusive ComNet ComFit housing, these units may be either wall
or rack-mounted (using ComNet C2 network-managed rack), or may be DIN-rail
mounted by the addition of ComNet model DINBKT1 adaptor plate. See
Figure A
on
Page 10
for mounting instructions.