manualshive.com logo in svg

CommScope SYSTIMAX iPatch Panel, Manager'S Manual

Share
Download
CommScope SYSTIMAX iPatch Panel Manager'S Manual Download Page 37

Chapter:

 Installing the iPatch Equipment

2–21

Setting the Patching Mode for the iPatch Manager

The following patching modes can be programmed for the rack:

ƒ

Normal

. The iPatch equipment assumes only one patch connection can be 

made at a time at the racks on the Rack Manager LAN.

ƒ

Local

. The iPatch equipment assumes each patch cord connection is within the 

rack so that patch connections can be made at the same time at multiple racks 
on the Rack Manager LAN.

ƒ

Equipment

. The iPatch equipment assumes each patch cord connection to an 

iPatch Panel in the rack is an equipment connection.

Note: 

The Set Patching Mode feature is available only for Rack Manager Plus and 

Panel Manager units.

The patching mode at the rack is set to Normal by default. To change the patching 
mode at the rack, use System Manager to select the desired patching mode and 
synchronize System Manager with the iPatch equipment. See the 

SYSTIMAX

®

 

iPatch

®

 System Manager User’s Guide

. The iPatch Manager shows the patching 

mode on the Ready screen.

Adding Patch Connections

Now you are ready to start adding patch connections. For more information on 
performing guided jobs and unguided patching activities, see Chapter 3, 
“Performing Patching Activities”.

or

or

Normal

Local

Equipment

                                 Rack 1
                Ready                 

   Menu  

 

  Alarms 

    

Jobs

                                 Rack 1
         Ready - Local Mode            
               

   Menu  

 

  Alarms 

    

Jobs

                                 Rack 1
       Ready - Equipment Mode            
             

   Menu  

 

  Alarms 

    

Jobs

Summary of Contents for SYSTIMAX iPatch Panel
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands