manualshive.com logo in svg

CommScope SURFboard SVG2482AC, User Manual, Page: 58 / 66

Share
Download
CommScope SURFboard SVG2482AC User Manual Download Page 58

Chapter 8: Managing your gateway and connected networks

SVG2482AC Reset/Restore Gateway screen

3. Click 

RESET

 located in the 

Reset / Restore Gateway

 table. The following message will

display:

Reboot Gateway message box

4. Click 

OK

 to reboot the SVG2482AC and then log back in.

Reset your SVG2482AC

Warning: 

 Resetting your SVG2482AC will delete your current gateway configuration

settings which include your passwords, wireless network name (SSID), firewall,

Parental Control, etc. The SVG2482AC default factory settings will be restored.

Choose one of the following options to reset your SVG2482AC configuration:

■

Reset SVG2482AC using the Reset button
OR

■

Reset SVG2482AC using the Web Manager

Note: 

 For network security purposes, ARRIS recommends that you change the

default admin password on your SVG2482AC. See Change the default password

for more information.

SURFboard

®

 SVG2482AC Wi-Fi

®

 and Voice Modem for XFINITY

®

 Customers User Guide STANDARD Revision x.5

58

Summary of Contents for SURFboard SVG2482AC



































































Reviews:

No comments