manualshive.com logo in svg

CommScope RUCKUS ICX 7550, Hardware Installation Manual

Share
Download
CommScope RUCKUS ICX 7550 Hardware Installation Manual Download Page 100

When the RUCKUS ICX 7550 switch is powered on, the power LED on the front of the device lights up green to confirm that the power supply is
correctly installed and supplying power.

Grounding the RUCKUS ICX 7550 Switch

The rear panel of the RUCKUS ICX 7550 includes a grounding terminal. The surface area around this terminal is not painted to provide a good
electrical connection. Before connecting power to the device, the grounding terminal must be connected to ground to ensure proper operation and
to meet electromagnetic interference (EMI) and safety requirements.

Default and Optional Lugs

The default lug for the grounding terminal is the one-hole lug, but there is also an option for a two-hole lug. Both are shown below.

FIGURE 77 Connecting the Grounding Terminal With Default (One-Hole) Lug

1.

Grounding terminal

One-lug information:

•

Manufacturer of grounding lug: Jeesoon Terminals

•

Part Number: 90R2-4LA

•

Screw: Machine Screw, M4-0.7x8

Power Supplies
Grounding the RUCKUS ICX 7550 Switch

RUCKUS ICX 7550 Switch Hardware Installation Guide

100

Part Number: 53-1005648-04

Summary of Contents for RUCKUS ICX 7550














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands