CommScope RK4P45-29A, Assembly Instructions, Page: 1 / 5

4-Post Equipment Rack Assembly Instructions
© 2013 CommScope, Inc. All rights reserved Page 1 of 5
General
The 4-post equipment racks are industry standard 19-inch (483mm) and 23-inch (584mm) wide racks
available in 7 foot (2.1m), 8 foot (2.4m), and 9 foot (2.7m) heights with either aluminum or steel vertical
uprights (rails). Aluminum uprights include 12-24 tapped holes that accept 12-24 x 1/2” mounting screws
(provided). Steel uprights include punched holes that accept M6 cage nuts and M6 x 12 mm mounting
screws (both provided). The 4-post racks are designed to withstand a 2000 lb. (454 Kg) static load.
Ordering information is provided below:
Part Number Ordering No. Description
RK4P45-29A 760082529 45U Rack, aluminum rails, 29” x 7’ (.7m x 2.1m)
RK4P52-29A 760082537 52U Rack, aluminum rails, 29” x 8’ (.7m x 2.4m)
RK4P45-36A 760082560 45U Rack, aluminum rails, 36” x 7’ (.9m x 2.1m)
RK4P52-36A 760082578 52U Rack, aluminum rails, 36” x 8’ (.9m x 2.4m)
RK4P58-36A 760139709 58U Rack, aluminum rails, 36” x 9’ (.9m x 2.7m)
RK4P58-36A-23 760142331 58U Rack 23” (584mm) wide, aluminum rails, 36” x 9’ (.9m x 2.7m)
RK4PE-45-29S 760175703 45U Rack, steel rails, 29” x 7’ (.7m x 2.1m)
RK4PE-52-29S 760175711 52U Rack, steel rails, 29” x 8’ (.7m x 2.4m)
RK4PE-45-36S 760175729 45U Rack, steel rails, 36” x 7’ (.9m x 2.1m)
RK4PE-52-36S 760175737 52U Rack, steel rails, 36” x 8’ (.9m x 2.4m)
How to Contact Us
•
To find out more about CommScope
®
product
•
For technical assistance:
-
Within the United States, contact your local account representative or technical support at
Outside the United States, contact your local account representative or
Authorized Business Partner.
-
Within the United States, report any missing/damaged parts or any other issues to
CommScope Customer Claims
Outside the United States, contact your
local account representative or Authorized Business Partner.
WARNING
Legal Disclaimer: It is highly recommended that installation of this product be performed by a qualified and experienced
installer. Improper installation of this product could result in damage to the product, other equipment, or personal injury.
CommScope cannot be held responsible for damage to equipment or personal injury resulting from improper fastening or
misuse of information presented in this document. Racks must be wired per applicable sections of the National Electrical
Code (NEC). If grounding is required, appropriate grounding hardware approved by the NEC must be used.