CommScope PFU-P-E-O-060-01, Manual

Page: 11 / 27

1-Port 5Gb PoE Extender Manual
7
3. Package Contents
1-Port 5Gb PoE Extender, PFU-P-E-O-060-01.
The PoE Extender is supplied ready for cable installation with the solar shield attached.
Also Required (Not Included)
•
3mm and 4mm Allen wrench
•
1 10GBase-X SFP+ module, LC Duplex, Single-mode or Multi-mode
•
25mm Torque or adjustable spanner/wrench
•
30mm Torque or adjustable spanner/wrench
•
Phillips or Pozidriv screwdriver
•
Silicone grease
•
Loctite 222
•
Sharp knife for initial separation of the hybrid cable component parts
•
12 AWG or 2mm diameter wire stripper for 12 AWG cable
•
16 AWG or 1.2mm wire diameter stripper for the 16 AWG cable
•
Fastenings for wall or pole mounting
•
Fiber splice kit and LC connectors or fiber patch cords. CommScope 760243403 |
QWIK-FUSE™ Installer Termination Toolkit recommended.
•
Outdoor rated Cat6 or 6a shielded copper patch cord. CommScope CO11152-01 |
PCOSP-6S-BK or CO11192-01 | PCOSP-6AS-BK recommended.
•
CommScope Powered Fiber Cable. Any trimese style (PFC) cable may be used. These
cables are available in Indoor/Outdoor and Outdoor only versions with 12 AWG or16
AWG conductors, and 2, 4, or 12, single-mode (OS2) or multi-mode (OM3) fibers.